Easytronic (F13 MTA/F17+MTA)
- Product Code: P586
- Availability: In Stock
Can be remanufactured
| OBDII | Description | |
| P1607 | Position control error coupling actuator | |
| P1609 | Position sensor clutch actuator | |
| P1700 | Gearbox steering system operating problem | |
| P1723 | Selector lever data via unused cable | |
| P1728 | Switch motor mechanical failure | |
| P1729 | Switch motor electrical failure | |
| P1730 | Fault control gearbox | |
| P1735 | Gearbox parameters not learned |
IMPORTANT: Some malfunctions may be caused by worn contacts on the gear selector lever. By this we mean the contact points of the different positions (“P”, “N”, “R” and “D”).
Remanufacture may be possible
| OBDII | Description | |
| P1725 | Shift motor sensor supply voltage | |
| P1726 | Select motor sensor supply voltage |
These error codes often appear when a problem occurs in the Easytronic system wiring. Check in particular the wiring harness between the shift motors and the Mechatronic.
Is the wiring really OK? If so, then the shift motor may really be defective. In this case, the Mechatronic must still be remanufactured.
If in doubt, please contact our Customer Service.
| P1740 | Switch motor malfunction (often in combination with P1728) |
Cannot be remanufactured
| OBDII | Description | |
| P1734 | Touchpoint adaption not done | |
| P1735 | Gearbox parameters not learned |
These error codes only appear if the learning process has not been completed correctly. Without the presence of other error codes, this means that the learning process simply has to be repeated.
| P1703 | Signal brake light switch out of range |
This error code also causes an “F” in the display and the car cannot be started, but in this case the problem really lies with the brake lights themselves. Think of moisture in the rear lights or a wire break. A defective reversing light switch or brake light switch can also activate this fault code.
| P1733 | Wrong variant confi guration |
There is an incorrect type of Easytronic built into the car. Pay close attention to the part numbers when exchanging.
- Fault codes P1607 / P1609 / P1700 / P1723 / P1728 / P1729 / P1735
- Instrument cluster shows 'f' permanently
- Vehicle won't start
- Automatic gearbox changes gears poorly